0

Vertical Broaching Machine-Two in One Type

  • Vertical Broaching Machine - Two in One
  • Vertical Broaching Machine - Two in One
  • Vertical Broaching Machine - Two in One

When the operator performs the operation of the machine, it will have a certain height from the ground. Therefore, it is necessary to cooperate with the machine to build the personnel standing platform or place the machine below the ground, but the workpiece processing flexibility is high. Cars, aerospace, locomotives, bicycles, hardware, hand tools, gears, etc. are used by related customers.

The machine is equipped with two separate workstations, which can reduce the floor space and provide twice the capacity, which is mostly a dedicated machine for related processes that require a lot of production.

Its processing capacity is 5*2~20*2 tons, and the stroke is up to 1600mm. It can be applied to the broaching process of inner hole keyway, inner hole spline or special hole.

The machine is easy to operate, can be matched with special fixtures and custom broaches according to customer requirements, and can also be designed for automated production lines.

Inquiry Prev Next
Product Description
Working picture
Working picture
Product Feature
  • The workpiece is fixed during broaching, and the working platformdrives the broach to move downward for inner hole broaching.
  • The main power of the work platform is driven by a hydraulic cylinder.
  • The machine can be specially designed to reduce the overall height.When the stroke is short, the operator can stand on the ground for machineoperation or configure a small work platform to meet the operating height.
  • This is a dedicated machine with two processing stations to providedouble the working capacity.
  • Its small size saves plant space and saves more than 30% compared totwo broaching machines.
  • With broach protection device, it can effectively reduce tool damagecaused by human accidents.
  • However, there are fewer types of workpieces planned by the machine,and most of the machine actions during the machining process must be operatedby personnel.
  • With intelligent touch interface, personnel can manage the movement ofthe machine in the operation screen.
  • It can be made into a special external gear processing machine with acylindrical broach or a lifting fixture according to customer requirements.
  • It can be changed to servo motor drive asthe main power.
Product Specification
Specification   TUVB-590 TUVB-1090 TUVB-2090
Broaching force ton 5x2 10x2 20x2
Broaching stroke mm 800~1300 1000~1300 1300~1500
Rang of feed speed mm/min 0~10 0~10 0~8
Rang of retract speed mm/min 0~14 0~14 0~10
Max. workpiece diameter mm Ø250 Ø350 Ø400
Main hydraulic motor hp 10HP x 6Px2
5HP x 6Px2		 15HP x 6Px2
5HP x 6Px2		 30HP x 6Px1
5HP x 6Px2
Cutting oil pump motor hp 1/2HP x 6Px2 1/2HP x 6Px2 1HP x 6Px2
Hydraulic cylinder size mm Ø100x Ø70x
(850~1000) st		 Ø125x Ø90x
(1050~1350)st		 Ø180x Ø140x
(1350~1550)st
Helight of table mm 1100~1400 1400~1700 1700~1900
(WxLxH) Machine dimensions mm 3000x2500x
(2200~2500)		 4500x3000x
(2500~2800)		 4600x3200x
(2800~3100)
Machine weight ton 8~10 10~12 13~15
Back to List